TechnicianVision · Knowledge base
Sectioning And Partial Part Replacement: 2020 Jeep Gladiator
I-CAR · October 18, 2019 · Jeep
Summary
This document outlines the sectioning and partial part replacement guidelines for the 2020 Jeep Gladiator, detailing which structural components can be serviced and which are strictly prohibited from sectioning. It highlights that while the front rails and outer uniside have approved procedures, the inner/reinforcement unisides, rear rails, trunk floor, and bed components do not.
What to do on the job
Verify approved sectioning locations for the outer uniside and front rails on the official FCA/Stellantis portal, and do not attempt to section the inner uniside, uniside reinforcements, rear rails, or bed components.
How to use it
Use this document to justify the replacement of complete assemblies when dealing with damaged inner unisides, uniside reinforcements, rear rails, or bed components, as FCA explicitly prohibits sectioning these parts. It also serves as a reference to support labor times for partial replacement at factory seams for the front rails.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →