TechnicianVision · Knowledge base
Sectioning And Partial Part Replacement: 2017 Cadillac Escalade
I-CAR · April 6, 2018 · Cadillac
Summary
This article outlines the specific sectioning and partial part replacement guidelines for the 2017 Cadillac Escalade, highlighting procedures for the front lower rail, rear rails, and outer uniside. It notes that the front lower rail sectioning requires replacing both left and right frame ends along with the crossmember, and that outer uniside sectioning utilizes a 25 mm overlap lap joint.
What to do on the job
Verify specific GM sectioning procedures before cutting, ensuring that front lower rail sectioning includes both frame ends and the crossmember, and that outer uniside sectioning uses the required 25 mm overlap lap joint.
How to use it
Use this document to justify the labor and parts required for comprehensive front lower rail replacement (which must include both frame ends and the crossmember) and to defend the specific 25 mm overlap joint methodology required for outer uniside sectioning during the estimating and supplement process.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →