TechnicianVision · Knowledge base
OEM Pre-Repair Calibration Requirements
I-CAR · February 11, 2021 · Lincoln, Mazda, Nissan
Summary
This article highlights that ADAS calibration requirements vary significantly by OEM and must be met before performing any calibration. It provides examples of specific pre-calibration prerequisites, such as leveling the vehicle, adjusting tire pressures, removing cargo, filling the fuel tank, and performing a 4-wheel alignment.
What to do on the job
Always research and complete all OEM-specific pre-calibration prerequisites—such as fuel tank filling, tire pressure adjustments, cargo removal, and wheel alignments—before initiating the ADAS calibration process.
How to use it
Use this document to justify the labor and sublet costs associated with pre-calibration setup. When writing an estimate or defending a supplement, reference the specific OEM workshop manual requirements (such as fuel fills, wheel alignments, and cargo removal) to prove that these preparatory steps are mandatory, non-included operations required for a successful ADAS calibration.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →