TechnicianVision · Knowledge base
I-CAR Just In Time: Honda/Acura Squeeze-Type Resistance Spot Welds Destructive Test
I-CAR · October 18, 2023 · Honda, Acura
Summary
This I-CAR Just In Time article and video outline the specific procedures for performing squeeze-type resistance spot weld (STRSW) destructive testing on Honda and Acura vehicles. It highlights how to perform the test, calculate a pass or fail using the OEM Nugget Chart, and locate these procedures within the vehicle-specific Body Repair Manuals.
What to do on the job
Perform a destructive test weld and verify it passes using the Honda/Acura Nugget Chart for each unique weld configuration prior to welding on the vehicle.
How to use it
Use this document to justify the labor time required to perform mandatory pre-repair destructive weld testing. It proves that Honda/Acura requires a test weld and a passing destructive test for each unique weld joint before welding on the actual vehicle, which can be found in the BRM under Spot Welding - Weld Inspection.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →