TechnicianVision · Knowledge base
I-CAR Just In Time: Honda/Acura MIG Brazing Destructive Testing
I-CAR · October 18, 2023 · Honda, Acura
Summary
This I-CAR Just In Time video clarifies the destructive testing process for MIG brazing on Honda and Acura vehicles, highlighting a translation error in the Body Repair Manual regarding joint separation. It explains that the manual's instruction to 'cut' the test piece actually means to 'peel' the joint to properly inspect for silicone bronze filler transfer.
What to do on the job
Perform a destructive peel test (not a cut test) on a mock-up joint to verify proper silicone bronze filler transfer before performing any MIG brazing on a Honda or Acura vehicle.
How to use it
Use this document to justify the labor time required to perform destructive peel testing prior to MIG brazing on Honda and Acura vehicles. It serves as official clarification that the OEM manual's translation of 'cut' actually requires a 'peel' test to verify weld integrity.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →