TechnicianVision · Knowledge base
Hyundai: Who Requires Or Recommends MIG Brazing?
I-CAR · March 10, 2022 · Hyundai
Summary
This article outlines Hyundai's official stance on MIG brazing, specifying that technicians must not braze any body components other than those originally brazed at the factory. It also explicitly prohibits the use of an oxy-acetylene torch for welding on Hyundai vehicles.
What to do on the job
Only perform MIG brazing on Hyundai body components that were originally brazed at the factory, and never use an oxy-acetylene torch for welding.
How to use it
Use this document to justify the exclusion of brazing on structural or body components unless factory-specified, and to defend the use of proper MIG welding/brazing equipment over oxy-acetylene torches during the estimating and supplement process.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →