TechnicianVision · Knowledge base
Calibration Research Tips: Nissan/INFINITI Module Programming
I-CAR · June 20, 2022 · Nissan, INFINITI
Summary
This article highlights the requirement for module programming, which Nissan/INFINITI refers to as 'configuration,' for certain ADAS cameras and sensors after replacement or removal. It emphasizes that configuration must be completed using a scan tool before the ADAS calibration process can be successfully performed.
What to do on the job
Perform module configuration (programming) using a scan tool on Nissan/INFINITI front cameras, distance sensors, and side radars when replaced or removed, prior to attempting ADAS calibration.
How to use it
Use this document to justify the necessary labor and scan tool time required for module 'configuration' (programming) prior to performing ADAS calibrations on Nissan and Infiniti vehicles. It proves that configuration is a distinct, OEM-required step separate from the calibration itself when replacing or removing components like the front camera, distance sensor, or side radar.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →