TechnicianVision · Knowledge base

Bumper Cover Repair With ADAS: Mercedes-Benz

I-CAR · May 16, 2019 · Mercedes-Benz

Summary

Mercedes-Benz allows bumper cover repairs on vehicles equipped with ADAS (short-range radar), but strictly prohibits body filler repairs in the sensor areas and limits paint thickness over the sensors to a maximum of two coats.

What to do on the job

Do not apply body filler in the area of short-range radar sensors, and limit paint thickness over these sensors to a maximum of two coats.

How to use it

Use this document to justify bumper replacement over repair if damage is located directly over a radar sensor, or to defend the necessary refinish time required to carefully control and measure paint mil thickness to not exceed the two-coat limit.

Read the original at I-CAR ↗

This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.

TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →