TechnicianVision · Knowledge base
Back-To-Basics: Solvent Popping
I-CAR · September 20, 2018
Summary
This article outlines the causes of solvent popping, which occurs when solvents are trapped during the refinish process, resulting in small bubbles or pinholes. It emphasizes the importance of proper surface preparation, correct flash times, appropriate material thickness, and using the correct reducers, hardeners, and equipment settings.
What to do on the job
Follow the paint manufacturer's instructions and standard operating procedures (SOPs) for flash times, material thickness, and temperature-appropriate reducers/hardeners to prevent solvent trapping.
How to use it
Use this document to justify the necessary time and materials required for proper surface preparation, flash times between coats, and adherence to paint manufacturer SOPs to prevent refinish defects like solvent popping.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →