TechnicianVision · Knowledge base
Back-To-Basics: GMA Welding And Adhesive
I-CAR · October 9, 2026
Summary
This article highlights the critical preparation steps required when performing GMA (MIG/MAG) welding in combination with adhesive bonding. It emphasizes the necessity of keeping adhesive away from the immediate weld zone and ensuring the mating flanges remain free of contaminants.
What to do on the job
Mark the weld areas during an early panel test fit using tape or a scribe to ensure adhesive is kept completely clear of the weld zone.
How to use it
Use this document to justify the necessary labor time for panel test-fitting, marking weld zones, and meticulous flange preparation when performing weld-bonding procedures where STRSW is not possible.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →