TechnicianVision · Knowledge base
Advanced Driver Assistance Systems: 2019 Nissan Murano
I-CAR · November 27, 2019 · Nissan
Summary
This article outlines the ADAS features and calibration requirements for the 2019 Nissan Murano, detailing which sensors require calibration and which require specific physical alignment. It highlights that the front radar, front/side/rear 360-degree cameras, and windshield-mounted forward-facing camera require static calibration, while the bumper ultrasonic sensors and rear corner radar sensors do not require calibration but must meet strict mounting and positioning specifications.
What to do on the job
Perform static calibrations on the front radar, 360-degree cameras, and forward-facing windshield camera after specified collision events, and verify the precise physical mounting orientation and measurements for the non-calibrated ultrasonic and rear corner radar sensors.
How to use it
Use this document to justify the labor and sublet costs for static ADAS calibrations on the front radar, windshield camera, and 360-degree camera system. Additionally, use it to support line items for the manual measurement and alignment verification of the rear corner radar sensors and ultrasonic bumper sensors, even though they do not undergo electronic calibration.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →