TechnicianVision · Knowledge base
Advanced Driver Assistance Systems: 2019 Hyundai Kona
I-CAR · October 7, 2019 · Hyundai
Summary
This article outlines the advanced driver assistance systems (ADAS) on the 2019 Hyundai Kona, identifying which sensors require calibration and which do not. Specifically, the front radar, front windshield camera, and rear corner radar sensors require static calibration after specific collision events, while the bumper ultrasonic sensors and rear-view camera do not.
What to do on the job
Perform static calibration on the front radar, front windshield camera, and rear corner radar sensors when required by collision events, and verify that the bumper ultrasonic sensors and rear-view camera do not require calibration.
How to use it
Use this document to justify the labor and setup times required for static calibrations of the front radar, front camera, and rear corner radar sensors on a 2019 Hyundai Kona. It helps defend against insurers who may question the necessity of calibrating these specific ADAS components after a front- or rear-end collision.
This page is a summary written by TechnicianVision. The document itself belongs to its publisher — follow the link above to read it in full.
TechnicianVision puts procedures like this next to the repair order you are working on. Create a free account →